2019年5月14日,美国贸易代表办公室做出决定,批准515项针对美国对华301征税340亿清单的产品排除申请。此次排除涉及21个10位美国税号,其中5个10位税号下的产品完全被排除,16个10位税号下的35项特定产品被排除。涉及过滤器、潜水机械、电动空气净化设备、除尘设备、输送机、液压电磁控制阀、直流电动机、按钮开关、立体显微镜、LED光治疗设备等产品。
经查询海关系统,本次排除涉及我市飞轮及滑轮、开关等2类产品,2018年相关税则号产品出口美国204.56万元。
美国税号 |
具体排除产品 |
具体排除产品 |
8407.21.0040 |
|
全部排除 |
8427.10.4000 |
||
8473.40.1000 |
||
8481.10.0090 |
||
8483.50.9040 |
||
8421.21.0000 |
Apparatus, including pitchers, bottles, and units designed for incorporation into refrigerators, appliances or sink faucets, the foregoing fitted with filters for filtering or purifying water |
装置,包括水罐、瓶子和设计用于冰箱、器具或水槽水龙头的装置,上述装置配有过滤或净化水的过滤器 |
Filtering apparatus, fitted with pumps, designed for use in pools, spas or similar contained bodies of water |
过滤装置,装有泵,设计用于水池、水疗或类似的含水体 |
|
Filtering or purifying machinery or apparatus of a kind used for waste water treatment |
用于废水处理的过滤或净化机械或装置 |
|
Submersible machinery for filtering water, designed for use in pools, basins, aquariums, spas or similar contained bodies of water |
设计用于水池、水池、水族馆、水疗或类似含水体的过滤水的潜水机械 |
|
Water distillation machinery and apparatus not covered by heading 8419 |
第8419品目未包括的水蒸馏机械和设备 |
|
8421.39.8015 |
Air purification equipment, electrically powered, weighing less than 36 kg |
电动空气净化设备,重量36公斤以下 |
Dust collection equipment for cement, minerals and mining industries |
水泥、矿产和采矿业用除尘设备 |
|
8428.39.0000 |
Apron-type chain conveyor |
板式链式输送机 |
Roller conveyors |
滚筒式输送机 |
|
Vibrating conveyors |
振动输送机 |
|
8438.80.0000 |
Machinery for mixing beverages in single servings for direct human consumption, designed for use in commercial food service establishments |
为商业食品服务机构设计的将饮料混合成单一份供人直接饮用的机器 |
Machinery for reconstituting single serving beverages for direct human consumption from frozen pre-packaged portions, designed for use in commercial food service establishments |
设计用于商业食品服务机构的冷冻预包装部分直接供人食用的单一服务饮料再造机械 |
|
8481.90.9040 |
Armatures designed for use in hydraulic solenoid valves |
液压电磁阀用电枢 |
C-poles, of steel, designed for use in hydraulic solenoid control valves |
C极钢制,设计用于液压电磁控制阀 |
|
Housings designed for hydraulic ball valves, of cast iron or steel, each measuring 5.7 cm by 3.2 cm and weighing 0.528 kg |
设计用于液压球阀的外壳,铸铁或钢制,每个尺寸为5.7 cm×3.2 cm,重量为0.528 kg |
|
Metering spools, of aluminum, designed for use in hydraulic solenoid control valves |
铝制计量线轴,设计用于液压电磁控制阀 |
|
Metering spools, of steel, designed for use in hydraulic solenoid control valves |
液压电磁控制阀用钢制计量线轴 |
|
Poles, of steel, designed for use in hydraulic solenoid control valves |
设计用于液压电磁控制阀的钢制电杆 |
|
Push pins, of steel, designed for use in hydraulic solenoid control valves |
液压电磁控制阀用钢制推杆 |
|
Retainers, of steel, designed for use in hydraulic solenoid control valves |
液压电磁控制阀用钢制夹持器 |
|
8501.10.4060 |
DC electric motors, of an output of less than 18.65 W, valued over $4, other than brushless |
直流电动机,输出功率小于18.65W,价值超过4美元,无刷者除外 |
8501.52.8040 |
AC electric motors, multi-phase, of an output exceeding 14.92 kW but not exceeding 75 kW, other than for use in civil aircraft |
输出功率超过14.92千瓦但不超过75千瓦的多相交流电动机,民用航空器除外 |
8505.90.7501 |
Coils, coil assemblies and other parts of electromagnets |
电磁铁线圈、线圈组件和其他零件 |
8526.92.5000 |
Radio remote control apparatus for garage doors |
车库门无线电遥控装置 |
Radio remote control apparatus for pet collars and pet food dispensers |
用于宠物项圈和宠物食品分配器的无线电遥控装置 |
|
Remote control devices, hand held and battery powered, designed for use with toy model vehicles and aircraft |
手提式和电池驱动的遥控装置,设计用于玩具模型车辆和飞机 |
|
8529.90.8100 |
Bezels, covers and housings, the foregoing designed for motor vehicle cameras |
嵌框、盖和外壳,上述设计用于机动车摄像头 |
8536.49.0075 |
Electromechanical relays, for a voltage exceeding 60 V but not over 250 V, with contacts rated at 10 A or more |
机电式继电器,电压超过60伏但不超过250伏,触点额定值为10安或以上 |
8536.50.9035 |
Push-button switches, rated at over 5 A, measuring no more than 2.9 cm by 2.9 cm by 2.9 cm, with 4 spade or brass terminals, with an actuator shaft with D-shaped cross section |
按钮开关,额定电流大于5 A,测量值不超过2.9 cm x 2.9 cm x 2.9 cm,带4个铲形或黄铜端子,带一个D形截面的执行机构轴 |
Push-button switches, rated at over 5 A, measuring no more than 4.8 cm by 2.8 cm by 2.8 cm, with 2 spade or brass terminals |
按钮开关,额定电流大于5 A,测量值不超过4.8 cm x 2.8 cm x 2.8 cm,带2个铁锹或黄铜端子 |
|
Push-button switches, rated at over 5 A, measuring no more than 5 cm by 1.7 cm by 1.9 cm, with 2 spade or brass terminals, with an actuator shaft with D-shaped cross section |
按钮开关,额定电流大于5 A,测量值不超过5 cm×1.7 cm×1.9 cm,带2个铲形或黄铜端子,带一个D形截面的执行机构轴 |
|
8536.50.9040 |
Snap-action switches, each designed for installation in a wall-mounted enclosure or electrical box |
速动开关,每个设计用于安装在壁挂式外壳或电气箱中 |
9011.10.8000 |
Stereoscopic microscopes, not provided with a means for photographing the image, valued not over $500 per unit |
立体显微镜,未提供照相手段,每单位价值不超过500美元 |
9011.90.0000 |
Adapter rings, tubes and extension sleeves, stands and arm assemblies, stages and gliding tables, eyeguards and focusing racks, all the foregoing designed for use with compound optical microscopes |
适配器环、管子和延伸套管、支架和臂组件、舞台和滑动台、护目镜和聚焦架,上述所有设计均用于复合光学显微镜 |
9018.20.0040 |
Ultraviolet or infrared LED light therapy devices for the professional treatment of pain or of ailments of the skin |
用于专业治疗皮肤疼痛或疾病的紫外线或红外线LED光治疗设备 |
扫一扫在手机上查看当前页面